Elevator outage at Capitol Hill Station. The elevator at the E Denny Way exit serving the street, South Mezzanine, and platform is out of service. See below for alternate route information.
In effect: April 15, 8:18 a.m.
Routes:
1 Line
To ride the 1 Line from the street:
1. Go to Broadway Ave E and turn right toward E John St.
2. Enter the station at the corner of E John St and Broadway Ave E.
3. Take the street level elevator down to the North Mezzanine for elevator access to the platform.
To ride the 1 Line from the South Mezzanine:
1. Take the pedestrian walkway toward the west exit.
2. Take elevator up to the street.
3. Turn left on Broadway Ave E.
4. Enter the station at the corner of E John St and Broadway Ave E.
5. Take the street level elevator down to the North Mezzanine for.
To exit the station from the platform:
1. Go to the opposite end of the platform toward the E John St exit.
2. Take the platform elevator to the North Mezzanine.
3. Take the elevator at the North Mezzanine up to the street (E John St & Broadway Ave E) elevator access to the platform.
New Variable Messaging Signs will be installed at University Washington Station beginning on Monday, April 8.
In effect: April 8 - June 7
Routes:
1 Line
New signs will help better communicate service information to passengers. Information displayed on signs at the stations may not be viewable during installation and testing.
There should be minimal impact on how a passenger navigates through the station platform and entry to the station.
University Washington Station scheduled installation: 8 a.m. - 4 p.m., 4/8 until 6/14.
This schedule may be subject to change and updates will be provided when available.
Late night rider information from Seattle-Tacoma International Airport to Northgate Station.
In effect: March 30 - Aug. 31
Routes:
1 Line
For service to Northgate via downtown Seattle, from Seattle -Tacoma International Airport:
On weekdays and Saturday, the last train to Northgate Station with service through downtown Seattle departs SeaTac/Airport Station at about 11:58 p.m. All remaining trains will terminate at Beacon Hill Station.
On Sunday’s, the last train to Northgate Station with service through downtown Seattle departs SeaTac/Airport Station at about 11:13 p.m. All remaining trains will terminate at Beacon Hill Station.
Passengers are recommended to exit at Mount Baker Station and use the following King County Metro Routes to travel towards Northgate Station:
• Passengers requiring service to downtown Seattle, please take King County Metro Route 7.
• Passengers requiring service to Capitol Hill Station, please take King County Metro Route 7 to 3rd Avenue and Pike Street, then transfer to King County Metro Route 49 at Pike Street and 4th Avenue.
• Passengers requiring service to University of Washington and U District stations, please use King County Metro Route 48.
• Passengers requiring service to Roosevelt and Northgate stations, please use King County Metro Route 48 and transfer to King County Metro Route 67.
