Stops and stations
Use your current location, select a recent search, or start typing to search for routes, stops, or locations. Explore options with up and down arrows, or by touch. Select with enter, click, or tap.

Everett Station

To ride the Sounder:

Passengers with a vehicle:

1. Take the elevator down to return to the parking lot (Park & Ride C).
2. Return to your vehicle.
3. Travel to Park & Ride B for access to Everett Station.

Passengers without a vehicle*:

5. Take the elevator down to return to the parking lot (Park & Ride C).
6. Exit the parking lot and turn left on Hill Ave.
7. Turn left on Pacific Ave and continue west.
8. Turn left on Smith Ave and continue south.
9. Enter Everett Station (Smith Ave & 32nd St).

*Note: This detour includes approximately 0.6 miles of additional travel and includes changes in elevation.

To exit the station:

To Park & Ride Lot C:

1. Turn right on Smith Ave.
2. Continue north on Smith Ave to Pacific Ave.
3. Turn right on Pacific Ave and continue east.
4. Turn right onto Hill Ave.
5. Enter the Park & Ride Lot C.
Due to safety concerns, bicycles are restricted on certain Sounder cars until further notice.

Only four bicycles are allowed per train car. Cyclists may only enter Sounder trains through doors with a bicycle symbol. Always follow any directions from the conductor.

Each Sounder train car has two tie-down spaces for cyclists to secure their bicycles. If the tie-down spaces are occupied, two additional cyclists may stand with their bikes. When standing with your bicycle, stand by the doors near the tie-down area. Restrain your bike with one hand and hold on to a secure pole with the other. Do not lean, or secure, your bicycle to other secured bicycles. Remember, you may need to move your bicycle, so other riders can move about the train.

Thank you.